North Wichita Tool Auction – Portable Concrete Mixer, Dewalt Compund Miter Saw, Milwaukee Tools, Ground Compacter

Description: Toro Portable Concrete Mixer with 2 inch ball in good working condition with Honda GX 240 motor. Has been garaged up until 6 months ago. will mix 9 cu. ft premix concrete. Opera...

Description: Like New Interchange Coil Nailer Model CN565 15 with original box. Does not appear to have been used much if at all, but is missing paperwork and oil bottle.

Description: Model DWV012 Dewalt shop vac in good working condition with hose, no bags.

Description: Like New Pittsburgh 4 Ton floor jack with Rapid Pump. In good working condition, appears to be new.

Description: in good working condition is a Rolair Portable Air Compressor Model MK246 The Bull""

Description: Husky Rolling Tool Box with a few dings and scratches but overall decent shape and capable of it's intended purpose. Measurements are 27 wide, 17.5" deep, and 30" tall. Missing...

Description: 12 Compound Miter Saw in good working condition with metal blade. Missing guides on the side but who needs those anyways!"

Description: Craftsman 33 gal. air compressor 150 psi 1.6 HP running model 919167620 in good working condition with black 3/8 inch think rubber 30 ft air hose."

Description: This is a commercial wire stripper in good working condition, it is 110 with single phase motor. Will Strip various gauges of wire upto 2 inch.

Description: Delta Horizontal Band Saw 4x6" in good working condition. Single phase motor, 110 plug in."

Description: Milwaukee 12 volt ratchet and drill with 4 batteries, bag and charger missing cord. Ratchet and drill both work as they should and all four batteries hold a charge.

Description: 1/2 Impact with battery and charger in good working condition."

Description: Milwaukee 4 1/2 cordless grinder with battery in good working condition. missing guard and nut. No charger, but battery does charge."

Description: Milwaukee M18 Brushless 6 1/2 circular saw 18 volt (tool only) has been tested and does work as it should."

Description: Milwaukee M18 Cordless 18 volt Rotary Hammer Drill w/battery and charger in good working condition missing guide rod and front handle.

Description: Milwaukee 5 3/8 Metal Saw (bare tool) no charger or battery. Has been tested and works as it should."

Description: Milwaukee m18 Brushless Sawzall, Tool Only in good working condition. No charger or battery! Has been tested.

Description: Dewalt Drywall screw gun in good working condition!

Description: Rockwell Plunge Saw in good working condition with Ridgid Bag.

Description: 2 Dewalt 12 volt Impact Drivers (bare tools only) No chargers or batteries! Both do work.

Description: Pneumatic Powermate Metal Sheers in good working condition.

Description: Pneumatic Metal Body Saw and Metal Sheers, both in good condition.

Description: Dewalt 12 volt cordless Impact Driver and Drill, no batteries or charger! Both do work and come with Dewalt tool bag.

Description: Delta 6 Bench Grinder with Flexible Lamp in good working condition."

Description: Diehard 12 Volt Battery Charger in good working condition

Description: Powermate 3/8 Impact and Campbell Hausfeld Impact."

Description: Porter Cable Pneumatic Stapler in good working condition.

Description: Brad Nailer in good working condition.

Description: Item is in good working condition however it the plastic guard is broken and the cord has been repaired.

Description: Both Items in good condition.

Description: Poulan Pro Pruner with 31cc High Output Engine in good condition. Ran last season but can't get it started. Possibly needs carburetor cleaned.

Description: Nice framing nailer in good working condition

Description: Kobalt heat gun with case and attachments, appears to have been used very little. Works great!

Description: Appears to be in good condition but feel a little loose in the body of it. It does work

Description: 1 Central Pneumatic Crown Stapler and another crown stapler model SFW10 in good working condition.

Description: Doesn't appear to have been used much, in good working condition.

Description: Drill is in good working condition

Description: Dewalt 7 1/4 Circular Saw in good working condition with metal cutting blade in case with 2 extra blades

Description: Dewalt Sawzall in good working condition.

Description: Both in good working condition with dust catchers.

Description: Bosch Grinder in good working condition with diamond blade.

Description: 7 Klein flathead screwdrivers and 1 multi screw driver.

Description: Snap On 1/2 drive sockets with extension. 1 1/8, 1 1/16, 7/8, 13/16, 3/4, 11/16, 5/8, 5/8 deep socket, 9/16, 1/2, 3/8."

Description: Craftsman 6.0 Push Mower recently used but cannot get it to start today. No Bag!

Description: Klein Multimeter in good working condition

Description: Wagner Heat Gun works like it should!

Description: Nice Pro Grade 3/4 Quick Release Ratchet with 1/2" adaptor and 7 3/4" sockets sizes 1 1/8, 1 7/16, 1 5/16, 1 1/4, 1 1/2, 1 5/8, and 2 1/4."

Description: Murray Push Mower does run but needs attention.

Description: New Craftsman 39pc Tap and Die Set missing one pc.

Description: Submersible Utility Pump in good working condition.

Description: 4 huge wrenches 2, 1 5/8", 1 1/2", and 1 1/4""

Description: Hyper Tough 16 pc spring clamps. 2 sets, 32 pcs total

Description: 4 tubing cutters, 2 marked ridgid, 1 OEM and other unknown

Description: 2 orange 1 yellow 3 plug ext. cords

Description: Working Roto Zip with 90 degree attachment

Description: (2) 16" Oregon Chainsaw Chains new in package

Description: 1 with green cover works, other not tested

Description: No charge on battery so not tested

Description: Sunex Metric Crowfoot Wrench Set includes 34,35,36,38,41,42 and 46mm Wrenches

Description: 2 large wrenches 18 and 16""

Description: Black and Decker Stud Finder with case and attachments. Works as it should.

Description: Lot includes Lenox hack saw, box knife, pipe cutter, snips, 2 multi screwdrivers and new 1 hole saw"

Description: 2 Stanley and 1 Husky parts organizers full of bolts and nails

Description: Old Waterloo tool box with old wrenches

Description: 2 New Spools of Electrical Wire both 500 ft.

Description: 3 older chain binders in good shape

Description: Black and Decker Jig Saw in good working condition with bag and extra blades

Description: Good working condition

Description: Tool is in good condition and works as it should

Description: 14pcs Klein nut drivers and screwdrivers

Description: 3 14 pipe wrenches marked ridgid"

Description: Mixture of Klein tools with zippered bag. 10pcs total

Description: 13 C Clamps in various sizes from 1 to 6""

Description: 1 Vulcan other no name

Description: 2 Copper Head Cook Non Sparking Hammers

Description: 4 grease guns, 1 missing nozzle all in working condition

Description: Bosch Multimeter in good working condition

Description: 1 18 Poulan Pro Chainsaw Chain and 2 16" Oregon Chainsaw Chains"

Description: 2 1/2 Tees and 4 1/2" Elbows"

Description: 2 drill attachments both in good working condition

Description: Craftsman 20v drill no battery, Makita 18v drill no battery and bosch 12v drill no battery in Makita Tool Box with a ridgid 12v battery and porter cable 18v battery

Description: Lixie Dead Blow Hammer and 3 rubber mallets

Description: Yellow Jacket Tube Bender #60390 in good working condition

Description: green 14 awg wire over half spool and red 10 awg wire partial spool

Description: 3 Zircon Stud Sensors in good working condition

Description: Klein Tool Pouch 75lb load limit

Description: large and small caulking gun and 3 hacksaws 1 Stanley, greatneck, and challenger

Description: Good condition and works as it should Mac Tools Rivet Gun with case and rivets

Description: All in good working conditon

Description: Needle nose pliers, regular pliers and 2 pair of snips

Description: 2 LT16 Blue Point Wrenches in good condition

Description: Pittsburgh Steel Stamping Sets 1 1/4 missing the number 8 and the other 1/8" set new"

Description: Roto Zip Roto Saw works as it should

Description: Greenlee Clamp Multileter 600A works as it should, overall good condition

Description: 2 3/8 jaws and 3 1/4" Capacity. In good working condition"

Description: Country Line Water Pump in good working condition

Description: Tire Plugs, tools, and gauges

Description: Milwaukee Hole Saw Kit looks to be missing a few pcs but blades look new

Description: Over the Shoe, Open toe Spiked Shoes

Description: 1 Dremel Engraver appears to be new, 2 other engravers appear used all work

Description: New 75' rope, 3/8 thick camouflage"

Description: 34 Various Stamping Tools with Otter Box

Description: Nice Drill Bit Set and Extractor Set some Extractor bits replaced with Drill Bits

Description: Various Sizes and brands Some New. Dewalt, Irvin, and Milwaukee

Description: Various Sizes but all in good working order

Description: 18 Piece Hex Key Set with Handle. SAE and Metric

Description: 2 tackle boxes with automotive light bulbs, battery terminal cleaners, wrenches, fuses, pliers, and tire plug tools.

Description: Nice 21pc Enco Socket Set with Case 3/4 Drive"

Description: straps have been cut to various lengths but ratchets are all good

Description: 3 10' diamond roller chain #60 with 8 link spring connectors and 6 cotter pin Connectors New in Package

Description: Both appear to be in good working condition

Description: 1 1/2 Wrench marked John Deere in good condition"

Description: 3 Basin Wrenches in good condition

Description: Ridgid Pipe Treader Set with 6 Die Heads sizes 1/8, 1/4, 3/8, 1/2, 3/4 and 1 inch. Appears to be in good condition

Description: 50 Wrenches all different brands and sizes

Description: 1 Ramset Fastner gun and 1 Remington both in good working condition

Description: Both appear to be in good working condition, very clean

Description: 6 hammers total, 1 stubby hammer

Description: 1 diesel and the other gas

Description: 7 crowsfeet wrenches with 3/8 drive"

Description: 2 long shovels and 5 short shovels

Description: 4 ends and 6 poles, appear to be in good condition

Description: Water Resistant 300v 10awg 100 foot extension cord by yellow jacket

Description: Dremel MultiPro with case and accessories in good working condition

Description: Chain is in good condition.

Description: Handles need to be replaced on both

Description: 55 gallon barrel stand in good condition

Description: Jack Hammer in good working condition

Description: Nice Leather like atv pack that doubles as a backrest

Description: good condition, no tips or tears in cord works like it should. Very thick cord!

Description: table is 24wide x 14" deep x 24" tall and shelf is 57" tall x 11.5 deep x 30" wide"

Description: 1 is a come along binder and other regular chain binder both in good working condition

Description: Extra Long Torch and 2 tanks - 1 Appears Full and 1 Empty

Description: Adjustable Heavy Duty Roller Stand

Description: 36 wide, 21" deep and 18.5" tall. nice box for a truck or trailer"

Description: Looks almost new, 100 foot air hose 3/8 thick with regulator valve"

Description: Compactor does work however it needs a new pull cord to start it.

Description: 2 ball, appears to be in good condition"

Description: Starts and Runs like it should

Description: Bobcat door and glass encloser not sure what model it fits but is bobcat

Description: Industrial 6 Gallon Shop Vac missing tip on vacuum hose

Description: David White Transit with case appears to be in good working order.

Description: 6 1/2 MasterForce Circular Saw missing battery"

Description: 12 Hilti Hammer Drill Bits and 2 bottles of Grease

Description: Halogen work lights but Power Light work as they should

Description: 3 antique Torch Tips appear to be in good condition

Description: Heavy Duty 25' Tow Chain with hooks on both ends in good condition

Description: Heavy Duty Rigging Chains, 1 rated 5000 lbs

Description: Antique Reamer and Ratchet

Description: in good condition

Description: 2 says of jumper cables in working order

Description: 3 sledge hammers, 1 has broken handle is taped up

Description: Pipe Vise and pipe cutter appear to be in good working condition

Description: 5 pair of wire stripping tools

Description: 7 Tape Measures in good working condition

Description: Various sizes and brands Challenger, Blackhawk, Kal, and Vim Tool

Description: 2 crow bars

Description: 21 pcs total 1/2 drive impact sockets"

Description: Hole saw kits with miss matched brands and PCs some new milwaukee

Description: Various sizes 16 files

Description: used grinder wheels and cut off blades

Description: works like it should, 1/10 HP

Description: Both work.

Description: 32' chain with hooks, needs repaired at one hook

Description: 20' chain no hooks

Description: 2 jobsite tripods both in good condition

Description: Both in working order although one does have fraying around plugs and other has exposed wires

Description: all four hold air but not alot of tread on them

Description: 3 gas tanks, not sure contents

Description: Homemade Ramps very heavy, 6 1/2' long

Description: Cord in good working condition. water resistant 300v 12g

Description: 3 pair steel toed waterproof work boats size 10

Description: 9 pcs total scoring knife, flush cut saws and scrapers

Description: both in good working condition

Description: Various brands and sizes

Description: Hex key sets in good condition

Description: all in good condition

Description: 14pc total

Description: bottles of chalk over half full and all chalk lines work

Description: stainless steel sink

Description: Hirsch saw horses 2

Description: Box in good condition. Perfect for a truck

Description: 1 is air bubble and the other could be made into one

Description: appear to be good working condition

We take the health and safety of our bidders and employees seriously and wanted to share some of the things we will do in the current situation.- Load Out will be by Scheduled Appointment On...