Michaelis Trust Auction

Saturday, July 11, 2020 09:00 AM

Schneider Auction Service
    539 S Fossil Street, Russell, KS US

    This auction has been postponed from April 18 to July 11th.  Hopefully we will all bounce back.   Thanks for your understanding.

    Oilfield Business Auction

    Seller: Arnold Michaelis Trust / L & M Well Servicing, Inc. / J & M Well Servicing

    Date: Saturday, July 11, 2020

    Time: 9:00 AM

    Location: 539 S Fossil, Russell, KS

    Concession Stand will be available by Alice Hammack with all the proceeds going to

    “Operations Christmas Child”

    Real Estate will sell at 2 p.m.

    Seller: Arnold Michaelis Trust

    Tract I:

    Location: 539 S Fossil, Russell, KS

    Legal Description:  Russell City Lands, Section Thirty-four (34) Township Thirteen (13) South, Range Fourteen (14) West of the 6th P.M. Beginning 613.8 Feet South and 40 Feet West of the Northeast Corner of the Southeast Quarter (SE/4) Thence South 226.14 Feet, Thence Southwesterly 72.28 Feet, Thence North 95.43 Feet, Thence East 195 Feet to the Point of Beginning Section Thirty-four (34) Township Thirteen (13) South, Range Fourteen (14) West of the 6th P.M.

    General Description:  This property is zoned commercial totaling 2.2 acres with a 5,400 sq. ft. block building was built in 1950.  The building is 60’ X 90’, it has an area 26’ X 32’ used for office, two bathrooms, foyer, changing room, all with overhead storage.  There is a 14’8” X 26’ wash bay/paint booth, the building has two floor pits, two walk in doors and two overhead doors, one is 16’ X 12’8” and the other is 10’ X 9’.  The property does have other out buildings and is on city utilities and water.  The property location has the frontage road of Fossil Street and the rear being S. Front Street.

    Tract II:

    Location: 543 E 1st Street, Russell, KS

    Legal Description: Laing and Beardsley’s Addition, Section Twenty-six (26), Township Thirteen (13), Range Fourteen (14) West, Block Six (06), Lot Fifteen (15) Section Twenty-six (26), Township Thirteen (13), Range Fourteen (14) West of the 6th P.M.

    General Description:  This lot is a 50’ X 122’ lot with a 12’ X 24’ storage shed on it.  The property is zoned residential and has city utilities and water available.

    Terms, Taxes, & Title Insurance: Ten percent (10%) down day of sale, balance due upon closing. This auction sale is not contingent upon the purchaser’s ability to finance the purchase. Buyers must make finance arrangements, if needed, prior to the auction. Seller shall pay all the 2019 taxes and prior year taxes. 2020 taxes shall be prorated to date of closing and subsequent years taxes shall be the responsibility of the Buyer. 2019 taxes were $2,253.66 for Tract I and $62.80 for Tract II. Title insurance shall be used to prove clear and merchantable title with the Buyer & Seller sharing equally the owner’s policy expense. The mortgagee’s policy, if required, will be the expense of the buyer.

    To view this property please contact Jason to make arrangements.

    This Real Estate is selling under the firm of Hamit Land & Auction Inc.

    Jason W. Schneider, Salesperson 785-650-2433          

    Donald L. Hamit, Broker 888-573-6585

    Vehicles:

    2000 Chrysler Mini Van, VIN 2C4GP54L51R233813, 147,913 miles, power locks and windows

    2000 Ford F150. VIN 1FTRX18WXYKB01547, 239,000 miles, ext. cab, automatic, Triton V8, 4X4 has been disconnected, toolbox

    1990 4600 International, VIN 1HTSBZPM9MH349135, 7.3 diesel, 4 speed, air bag system, 188” wheel base, under mount toolboxes and trays, has 4X6 Gaso mud pump w/231 Chevy motor

    1998 GMC 2500, SL, VIN 1GTGCZ4R8WE556014, 171,875 miles, 350 Vortec Eng., toolbox

    1998 4900 International winch truck, VIN 1HTSDAAN3XH207963, 466 IH motor, 6 speed, 4 speed Brownie Light winch, gin poles, tool boxes, rolling tail board, 272” wheel base

    2000 4700 International flatbed, VIN 1HTSCAAM61H381382, Eco automatic trans., 466 IH motor, 254” wheel base

    1998 Ford F250, XL, VIN 1FTPF28L5XKA26003, Triton V8, automatic, toolbox

    1998 Chevy 3500, VIN 1GCHK39J2WF072026, 454 Vortec Eng., 106,000 miles, ext. cab, 4X4, flatbed, 12 K Badland winch, gin poles

    1962 GMC farm truck, VIN 2C633K108980, 15’ bed, wood floor, 4X2 speed trans., rough

    1989 Ford F150, VIN 1FTEF15N5KPA69713, automatic

    2006 Hyundai car, 4 door, 193,000 miles, automatic, AC, VIN KMHFC46F27A171031

    Tractor/Combine/Gator/Mowers/Equip.:

    2001 Massey Ferguson 1165, SN KN0606, 1,250 hrs., 232 loader, 3 point, PTO, MFWD

    International 715 combine w/header

    John Deere Gator 4X2, 698 hrs., hydraulic dump bed

    John Deere 110 mower, w/ snow blower, mower deck, push blade

    John Deere L110 riding mower

    Lawn Boy riding mower

    King Kutter rotary mower, 5 ft.

    Post hole digger

    Back blade

    Road drag

    Ward front tine rotor tiller

    5 HP rear tine Rotor tiller, 17”

    Trailers:

    8’ X 28’ flat bed trailer, tandem axle, reverse fifth wheel hook up, homemade

    6’X26’ gooseneck flatbed trailer

    2- single axle pipe trailers

    ¾ Ton pickup bed trailer, utility boxes

    2 wheel trailer

    8’ X 16’ stock trailer, wood floor

    6’ X 10’ 2 wheel utility trailer

    Guns:

    Harrington Richardson Deluxe Topper model 98, 20 gauge, single shot, SN AN224221

    Daisy Red Rider model 1938 BB gun, SN G308685

    Savage Arms Springfield model 67E, 12 gauge pump, 2 ¾”

    Winchester model 1300, 12 gauge, SN L3097957, 2 ¾” & 3”

    Mossberg 12 gauge bolt action, clip, C Select choke

    Remington model 1100, Semi Auto, 12 gauge, 2 ¾”, SN 109090V

    Winchester model 290, 22 short/long/long rifle, tube fed, semi auto, SN 422722

    Oilfield Equip./Supplies:

    Pipe and rod racks

    Redi pump spooler

    Insert pump, 2 X 1 ½ X 14

    1 ¼ sinker bars

    1 ¼ polish rods

    Dead men

    Casing bales

    Numerous double sheave tubing blocks

    Wood timbers

    Dual completion packers

    Fishing tools

    4’ up to 10’ rod subs, 7/8” & ¾”

    Mud anchors

    Tie down rig stakes

    5 ½” & 3 ½” weight pipe

    Assorted tubing, 2 ½” and 2 3/8”

    Lower sections of rig poles

    7” baler

    100 +/- sticks of structural sucker rod

    120 +/- sticks of sucker rod

    60 +/- joints of 2 3/8” fiberglass tubing

    15 +/- joints of 2 3/8” seal tight tubing

    100 +/- structural tubing

    2 - Complete 8 X 10 pole

    5 ½” & 3 ½” balers

    4 ¼” & 3 ¼” sand pumps

    Wind blocks

    Redi line reel

    Drum brakes

    Pickles

    Elevators

    Sheaves

    Hydraulic pumping unit

    2 - 42’ I beam

    Blocks

    30” tube bales

    Spiders

    Orbit valves

    Casing heads, 4 ½” to 5 ½”

    Spools of cable

    Sand pump bottoms

    Casing bits

    Head slips

    Shoes

    Franks Box

    Swabs

    Hammer unions

    Bits

    Chain tongs

    Rod hooks

    Connections

    Spider bowls

    Polish rod clamps

    Packers production

    Flow T’s stuffing box

    Line wrenches

    Swab hoses

    Pump push rods for 4 X 6 & 4 X 8

    Tongs

    Mud mix hopper

    And much more

    Engines:

    Hand crank 4 Cyl motor

    Mud pump transmission

    692 Detroit motor

    2 – Waukesha motors

    5 X 8 Gardner Denver mud pump (parts)

    6V92 Silver Detroit motor w/ 13 spd. Eaton Transmission

    International motor

    Shop Tools / Supplies:

    Fuel tanks

    Chain link fence and gates

    Sheep fence

    Numerous tires and rims

    Tool boxes

    Shop wood stove

    Propane bottles

    3 trailer house axles

    5- 3500 lb. axles

    Hyd. cylinders

    Protech drill press

    Scaffolding

    Shop stools

    Miller 180 SD welder

    Hotsy pressure washer, diesel burner

    Cutting torch

    Ramco cherry picker

    Log splitter

    Oil, anti-freeze, hyd oil drums

    Heat Buster shop fans

    Tire cage

    Tire machine

    Weed burners

    Tarps

    Load binders

    Chain

    Vice grips

    Receiver hitches

    Grease guns

    Power tools

    Numerous containers of hardware and parts

    ¾” socket sets

    Adjustable wrenches

    Pipe wrenches

    Reamers, threaders

    Ammo boxes

    Port a power

    Come a long

    Milwaukee grinder

    Bench grinders

    Braces, bits

    Screwdrivers, nut drivers, chisels, punches

    Oil saver pumps

    Gosiger Dayton drill press, 2 speed transmission

    Cable cutters

    Bottle jacks

    Skil cut off saw

    Ramco Industrial press, 55 ton

    Metal storage cabinets

    Portable Multi Power air compressor, 5.5 hp. Eng.

    Numerous work benches

    A Frame w/2-ton hoist

    Drop cords

    Ladders

    10” radial arm saws, DeWalt and Craftsman

    Schumacher battery charger

    Car ramps

    Ratchet straps

    Mills

    Sockets, wrenches, pry bars, hammers, sledges, and more

    Craftsman tool box and cabinet

    2 Lincoln cracker box welders

    3- smaller generators

    Band saw

    Air bubbles

    And more….

    Antiques:

    Cream separator

    Enterprise sausage presses

    Walk-behind cultivators

    Stoves

    Gas cans

    Maytag motor

    Lanterns

    Cast iron boiler

    Cast iron bean pot

    Simplex jacks

    Office Equipment:

    Wood doors

    Cabinet doors

    Filing cabinets

    Numerous desks

    Admiral refrigerator

    Microwaves

    Office chairs

    Shelves

    Office supplies

    2 recliners

    Auctioneer Note:  If it was used in the oil field, Arnold had it!  This will be a very large auction; we will probably be running two rings so come prepared.  Arnold’s shop is very full and we will find more items not listed once we start putting items on trailers, come see what treasures we uncover. 

    Disclaimer:

    Announcement: Information contained herein is presented on behalf of the seller. Schneider Auction Service, agent for the seller, cannot guarantee the information to be correct or assume the liabilities for errors and omissions. All lines drawn on maps are approximate. Buyers should verify the information to their own satisfaction. Any announcements made from the auction block on day of auction will take precedence over any matter of print and will be final.